product

The Beran Condition Monitoring System features parallel dynamic acquisition for both steady-state (on-load, barring) and variable speed (run-up, run-down) plant modes, with simultaneous acquisition of vibration and process...

A lightweight, compact, robust and user-friendly system, designed for research and production quality control of road surfaces, with absorption, reflection and impedance...

The rugged SomatXR data acquisition system facilitates use in harsh environments. Besides being extremely reliable, precise, and protected from humidity, dust, shock, and vibration. The modular system is well-suited to be used in a variety of...

The WindMETER system is a reliable monitoring solution specifically designed to monitor wind generator blades. It combines sensors and data acquisition hardware to provide real-time measurements, and is designed to integrate and upstream the...

Rugged shock monitoring for platforms. Registers mechanical influences with the installation / operation of offshore plants. Shipped with highly sensitive and long-term stable acceleration...

THE ELECTRO-SENTRY 1 IS A SINGLE LEG SYSTEM THAT COMBINES THE KEY ELEMENTS OF SHAFT SPEED, BELT ALIGNMENT, AND BEARING TEMPERATURE INTO AN EASY TO USE STAND-ALONE HAZARD MONITORING...

PMX is the precision multi channel data acquisition system that is particularly suitable for measuring and monitoring tasks in test benches, machines and plants used for...

The QuantumX data acquisition system (DAQ) is the perfect tool for all of your test and measurement needs. For reliable data acquisition of different physical quantities and sensor technologies, QuantumX is the preferred choice. It has the unique...

The distributed amplifier system for structural testing and experimental stress analysis! The CANHEAD amplifier system can be installed directly at the measuring points. Thus, it reduces wiring expenditure, while at the same time offering an...

Designed for use in permanent, semi-permanent or portable noise-monitoring...

The M100T and M5000T Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. These switches have a terminal block inside the housing for easy wiring connection and...

The PVC-Series of corrosion-resistant speed switches are self-contained rotation monitoring systems that are ideal for detecting the unwanted slow down or stoppage of process...

The AP1000 Series Digital Tachometer is a complete rate monitoring system that combines accuracy and reliability in a rugged, compact...

The DR1000 Speed Switch is a complete precision rotation monitoring system ideal for detecting unwanted slowdown or stoppage of process equipment. The system is commonly applied to the following: drive trains, power driven components, crushers,...

Electro-Sensor’s FB420 is an integral part of the Electro-Sentry™ Hazard Monitoring System but is also available as a stand alone shaft speed sensor. The FB420 provides a 4-20mA signal directly proportional to the rotational speed of a monitored...

M-Series Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. The M100 has a relay setpoint range of between 10RPM and 100RPM. The M5000 has a relay setpoint range...

Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure...

Electro-Sensors' SG1000C is a complete position monitoring system used to accurately measure the position of a process that has a repetitive single-turn rotary...

Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a...

Electro-Sensors’ SG1000B is a complete position monitoring system designed to sense the position of both linear and rack-and-pinion driven slide...

HazardPRO stud-mount temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO ambient temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO shaft RPM sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

The Beran 766 Portable is a fully integrated, single instrument developed from the Beran 766 Condition Monitoring System. It is designed for use by vibration analysts in trouble shooting, balancing and return-to-service/commissioning roles. The unit...

The 767 Portable Condition Monitoring System offers unparalleled facilities in a compact, rugged and easily portable unit weighing less than 12.5...

The Beran 768 Condition Monitoring System is an optimised solution for smaller turbines such as those used in Hydroelectric and Gas Pumping Installations. In addition, an alternative configuration utilising a multiplexed input option is ideal for...

The MP85A FASTpress process monitoring system measures the signals of processes precisely and quickly at up to 300 fitting cycles per minute. It allows for 100% transparency in your fitting...

The ITCA series load cell is ideal for measuring both tensile and compressive forces. Available in capacities from 1MT to...

ICPA is a stainless steel compression-only load cell typically used in higher force applications. Available in capacities from 2MT to...

The WSSB S-Beam load cell series is ideal for measuring both tension and compressive forces where high accuracy measurements are required. IP68 rated and available in capacities from 250kg to...

Type 8347-C is a piezoelectric, shear design, charge...

Designed for vibration measurements in harsh industrial...

Designed for measurements in harsh industrial...

Designed for Health Usage Monitoring of gearboxes on...

Designed for flight-test applications and measurement in harsh...

Suitable for IEC61672 Class 1 compliant outdoor sound...

The Model EGCS3-D triaxial accelerometer is available in ranges from ±5g through ±5000g. With over-range limit to ±10,000g and spring strain relief, this rugged device is ideal for offshore, downhole and shock testing...

The Model 7204A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. The model 7204A is available in ±10 to...

The Model 7134A is a true case isolated triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features three internally shielded accelerometer assemblies for superior noise isolation. The assemblies are installed...

The Model 7202A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to 15kHz with a resonant frequency greater than 40kHz. The model 7202A is available in ±10 to ±500g ranges...

Provides independent, accurate feedback of slide gate position to a controller (PLC) or optional remote slide gate...

The MS54xx SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier or a 6.1 x...

Robust Load Cell Edge-Amplifier with IT/OT...

The NEW Ruby MEMS accelerometers represent the next generation of high-performance inertial sensors from Jewell...

HBK 2255 Sound Level Meter is an advanced, single-channel, class 1 sound level meter. While the instrument can be used as a stand-alone measurement device, it also works with our task-tailored mobile and PC apps and features a powerful open...

Model INF-USB3 PC Interface Module makes any Load Cell USB...

The Interface INF4-Analog Two, Three, and Four Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm...

Jewell Instruments DKA Series Accelerometers are an excellent choice for cost to performance trade off. The DKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high...

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  SC version...

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  LC version...

The TE model 8911 wireless accelerometer combines a sensor, data collector, digital signal processor, and radio into one compact, battery-operated device that measures both vibration and temperature...

The new QuantumX MXFS BraggMETER is both an optical interrogator and an integration toolkit for the reliable QuantumX DAQ system. It offers 8 connectors for 16 channels each totaling impressive 128 channels per...

With a maximum output capacity of 1250 VA, this powerful amplifier is used to drive modal exciters and small...

Available with outputs ranging from 8 to 56 kVA, these switch-mode power amplifiers are used to drive electrodynamic shakers with force ratings of at least 9.81 kN (2205 lbf), such as LDS...

A range of digitally controlled, switch-mode amplifiers used to drive electrodynamic shakers with force ratings of at least 89 kN (20,000 lbf) for vibration testing and other applications. Available with outputs from 70 to 280...

A permanent magnet, electrodynamic shaker for vibration testing of small components and assemblies, as well as for laboratory experiments, modal studies and structural analysis. It can impart maximum forces up to 196 N (44...

A permanent magnet, electrodynamic shaker for vibration testing of electronics and small assemblies, modal and structural analyses, and fatigue and resonance tests. Maximum forces up to 311 N (70...

A permanent magnet, electrodynamic shaker for vibration screening of very small components and assemblies, and for modal and structural analyses and other types of bench-top testing. Peak sine force rating of 8.9 N (2...

A permanent magnet, electrodynamic shaker for fatigue and resonance testing, modal and structural analyses, and vibration screening of small components. Peak sine force ratings of 17.8 N (4 lbf) or up to 26.7 N (6 lbf), when forced-air...

A permanent magnet electrodynamic shaker for vibration testing of small assemblies and electronics, fatigue and resonance tests, and modal and structural analyses. Capable of imparting forces up to 489 N (110...

Type 2250 Light is a basic class 1 sound level meter. These sound level meters have been developed specifically for measuring occupational, environmental and product...

A combination of low frequency auxiliary channels and dynamic inputs which supports high speed tacho...

PULSE software that plugs in to diverse driving simulators to generate highly authentic and dynamic vehicle sound...

20 dB gain, for Type 4179. Designed for very-low-level sound measurements.  This is a modified version that can be used with PULSE using extension cable...

20 dB GAIN, for Type 4179. Designed for very-low-level sound...

10 Hz to 10 kHz (+/-2dB), 200V Polarization.  Designed for measuring ultra-low sound pressure...

The WTS-BS-4 is one of a range of base stations for the WTS modular telemetry system. It has a USB interface, is housed in an IP67 enclosure and has better coverage than the...

The WTS-BS-3E is one of a range of base stations that are required for configuration and calibration of the WTS modular telemetry system. Base stations can also be used for data collection systems by making available the WTS wireless transmitter...

The WTS-AM-3 transmitter module connects to 4-20 mA conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS-AM-2 connects to 0-10 V conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS-AM-1F transmitter connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. Transmits at 2000/samples per...

The WTS-AM-1E connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. The data transmitted by the WTS-AM-1E can be received by multiple WTS...

The intelligent process controller MP85A-S EasySwitch measures function and operation feeling (haptics) of switches as well as closing elements - and allows a 100 percent process and quality...

The MCS10 multi-axis sensor measures up to 6 different forces and torques simultaneously and almost completely compensates for signal crosstalk – for exact measurement...

The T40MC torque transducer has been developed for integration into ship engines with neutral installation requirements. It is ideal for monitoring load signals, either for new ship engines or as a retrofit...

strain gauge full or half bridge, quarter bridge (350 or 1000 ohm completion...

Temperature, humidity and pressure measurement in one sensor. Suitable for MONI LOG® EnDaL curve and ShockDisplay...

GPS receiver and GSM/UMTS radio module for MONI LOG® data logger. An additional device for position finding of the transport data and for data transfer by GSM/UMTS network. With email and SMS option, as well as Web data-center for online...

Radio sensor network compromising up to 8 autonomous sensor modules. For long-term monitoring of oversizing systems and...

Extremely rugged shock recorder for exact verification of the transport quality. With integrated GPS receiver and inclination sensor. Connection for optional combination sensor for pressure / temperature /...

Extremely robust transport data logger with display. Stores the 500 largest shock events with time graphs, and inclination...

The JEWELL LCI Series meets the needs of high accuracy inclinometer applications with low shock and vibration such as those found in laboratories. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at...

The LCA-100 accelerometer is a 0.5G to 5G-range sensing pivot and jewel device that meets the demands of many applications. Suspension technology and bandwidths of 60Hz to 250Hz make the LCA-100 popular for a variety of military, commercial and...

Model INF-USB2 makes any load cell USB compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. Included software works well for convenient testing and monitoring applications...

The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor...

The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

Whether it is force, pressure, torque, or load — the digiCLIP modular signal conditioning system acquires signals in production and process monitoring quickly and...

With an accuracy class of 0.01 and an integrated calibration certificate, the interference-proof signal conditioner ClipX is setting new standards in industrial process...

The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor...

The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor...

The Model 8102 is a low cost, plug & play triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of only 22 micro-amps. The model 8102...

AED Basic Devices - The AED Basic Devices: The Right Connection for the AD103C...

The T12HP torque transducer offers exceptional precision and superior performance for dynamic measurements in test benches to increase efficiency and optimize...

T40MAR Torque Transducer for Monitoring and Control of Ship...

TT420 temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog...

TT420-LT temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog...

The LI66 strain gauge is embedded directly in the structure during the fiber composite production process. This allows measurements in places that are no longer accessible after...