||UP469 Single-Phase Analyzer
• Up to 500 Vac, 5 Arms Input
• DC Output
• 3750 Volt Galvanic Isolation
• Accuracy (0.5%)
• DIP Switch Configuration
• PC Configurable
• RS485 Modbus RTU
• Flexible Power: 10 - 40 VDC or 19 - 28 VAC (50-60 Hz)
• DIN Rail Mount (35 mm)
• Removable Terminal Blocks
The UniPak™ model UP469 is a complete single-phase analyzer that accepts an input up to 500 Vac voltage range and 5A (50 or 60Hz) current. The instrument provides all the following electrical measurable quantities: Vrms, Irms, Watt, VAR, Frequency and phase angle (Cos ?). Measurements are read through serial communication and both floating point and normalized format. The DIP-switches can be set for the analog retransmission of any Vrms, Irms, Watt, VAR or Cos ? quantity. The range of the retransmitted output is proportional to the full scale value of the quantity measured. Input scaling can be selected from 100%, 50% or 25 %, e.g.: voltage = 500, 250 or 125 Vrms respectively. The UP469 completes its unprecedented flexibility by including astandard serial communication protocol, Modbus
RTU, via RS485 bus or direct via RS232. The UP469 may be a Modbus slave. PC Configuration software is available for enhanced operation and Modbus register configuration. LEDs on the front indicate status and power and provide
feedback for the Modbus communications.
Signal Conditioning flexibility and use made easy from ioSelect, powered by Seneca (Z203).
Click here to request more information about this product by filling out our online Information Request Form.