||UP 307A RS485 Isolator-Repeater
• Isolate and Amplify RS485 2 wire Bus Systems
• Speed selectable from 1200 bps to 115,200 bps
• 1500 Volt Isolation between X Port, Y Port and Power
• Ultra Thin - < ¼”
• Ultra Low Power ~ 500 mW
• 19.2 to 30 Vdc Power
• DIP Switch Configuration
The UniPak HD Model UP307A is a configurable, DC powered, DIN rail mount RS485 to RS485 isolator/repeater with 1500 volt isolation between the serial ports and power. The dip switch selectable communication rates offer flexibility and ease of configuration. The module’s ultra thin package (less than 1/4” thick) makes it ideal where panel space is a
premium. Other features include a power bus option, quick connection spring clamp terminals, and front panel
In operation both channels are receptive in their idle state. When data is detected that port is enabled and forces
the opposing port to become the data outlet.. The device returns to idle state (see switching time table) based on the communication speed. Two devices may be used as repeaters or isolators for a Full Duplex connection. It is
useful to have the master’s Tx line select the communication direction by selecting either the X->Y direction or the Y->X direction; although switching both dip-switches ON does not cause malfunctions, it inhibits the device with
both ports in transmission.
Signal Isolation and Amplification made easy from ioSelect, powered by Seneca (K107A).
Click here to request more information about this product by filling out our online Information Request Form.