Home Products Industries Manufacturers
 Search Products by Keyword  
Home
About Us
Contact Us
How To Buy
What's New
Service
Resources
Trade Shows
Product Brochure

PDF Download
PDF Download
Visit the OCI Website

View our CGP Certificate

View our ISO Certificate
Power Generation & Alternative Energy

Electricity generation is the process of creating electricity from other forms of energy. Sensor technology is utilized in the production of energy by such techniques as hydro-electric, nuclear, fossil fuels, solar and wind generation. Research and development in power generation is also a key market.

 
Products
 
13203CC Accelerometer
The Measurement Specialties 13203CC is an interchangeable and rugged uniaxial accelerometer capable of accurately measuring acceleration under demanding environmental conditions. A tough, compact housing holds potted electronics and a shielded heavyweight cable. Its cubical form allows mounting with the sensing axis oriented in any direction.
34201A Triaxial Accelerometer
The Measurement Specialties 34201A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and approximately 100 µg measurement resolution. Each axis is precisely aligned within 0.15 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
7132AHT Accelerometer
The Model 7132AHT is a high temperature miniature triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface.
1210F Accelerometer
The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and frequency response to 2000 Hz.
13200C 23200C Accelerometer
The Measurement-Specialties 13200C (uniaxial) and 23200C (biaxial) analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on one or two axes.
13201A 23201A Accelerometer
The Measurement Specialties 13201A (uniaxial) and 23201A (biaxial) analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range with superior bias stability and approximately 100 µg measurement resolution. Accurately measuring ±1 g, ±1.5 g, or ±2 g accelerations on one or two axes, their tough, compact housing holds potted electronics.
13207A 23207A Accelerometer
The Measurement Specialties 13207A (uniaxial) and 23207A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±10 g, ±20 g, ±30 g, ±40 g, ±50 g, ±60 g or ±70 g accelerations on one or two axes.
13208A 23208A Accelerometer
The Measurement Specialties 13208A (uniaxial) and 33208A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±250 g or ±500 g accelerations on one or two axes. Their tough, compact housing holds potted electronics and their small size and built-in power regulation allow installation where other accelerometers can’t.
15200B 25200B 35200B Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15201A 25201A 35201A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15203B 25203B 35203B Accelerometer
hese Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15207A 25207A 35207A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
15208A 25208A 35208A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
34200B Triaxial Accelerometer
The Measurement Specialties 34200B triaxial analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on three mutually orthogonal axes. Each axis is precisely aligned within 0.5 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34205A Triaxial Accelerometer
The Measurement Specialties 34205A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34205A to fit where other accelerometers can’t.
34206A Triaxial Accelerometer
The Measurement Specialties 34206A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34206A to fit where other accelerometers can’t.
34207A Triaxial Accelerometer
The Measurement Specialties 34207A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34208A Triaxial Accelerometer
The Measurement Specialties 34208A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
3803A Accelerometer
The Model 3803A is a triaxial piezoresistive MEMS accelerometer in a rugged welded hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to greater than 5,000g.
4000A Accelerometer
Economical, signal conditioned with integral temperature compensation. Rugged aluminum housing ideal for transportation and instrumentation testing. Available in ±2g to ±200g.
4001A Accelerometer
The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates an integral 5-pin connector at the end of the cable assembly. Available in ranges from ±2g to ±200g.
4020 and 4030 Accelerometer
The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth.
4332M3 Accelerometer
The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range.
4630A Accelerometer
The Model 4630A is an ultra low-noise triaxial accelerometer offering both static and dynamic response. The silicon MEMS accelerometer is gas damped in order to provide a wide stable frequency response.
4807A Accelerometer
The Model 4807A is an ultra low noise DC response accelerometer offering micro-g resolution. The accelerometer is sealed in a welded stainless steel package and offers an amplified signal conditioned output in ranges from ±2 to ±200g.
4835A Accelerometer
he Model 4835A is an ultra-stable MEMS triaxial accelerometer in a rugged, welded Titanium package. The variable capacitance MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide temperature range from -55°C to +125°C.
7134A Triaxial Accelerometer
The 7134A is a true case isolated triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. Features three internally shielded accelerometer assemblies for superior noise isolation. The assemblies are installed in a hermetically sealed light weight Titanium housing with a 4-pin Microtech connector interface.
7531A Accelerometer
The Model 7531A is an adhesively mounted triaxial charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz with a nominal charge output of 1.8pC/g.
7550A Piezoelectric Accelerometer
The Model 7550A is a high temperature piezoelectric charge mode accelerometer designed for long term health usage monitoring on turbine engines. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +300°C with output sensitivity options of 20pC/g & 50pC/g. The model 7550A is hermetically sealed and features the ARINC three hole mounting configuration. Available in ranges: +/- 500g, 1250g
8011-06 Velocity Transducer
The Model 8011-06 is an internally shielded piezo velocity transducer designed for condition monitoring of low frequency rotating machinery. The transducer is available in ranges from 10.0 to 50.0 in/sec and interfaces with the standard IEPE constant current supply.
801X-ARAP Accelerometer
The Model 8011 & 8012 are internally shielded rugged 4-20mA accelerometers. The accelerometers are available in ranges from ±5g to ±50g, in either RMS or Peak acceleration output options. The model 8011 features a top exit MIL-C-5015 connector while the model 8012 features an integral cable.
802X-01 Accelerometer
The Model 8021-01 & 8022-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 12kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
8032 IEPE Accelerometer
The Model 8032-01 is an internally shielded rugged IEPE accelerometer designed for harsh environments. It is available in ±50 to ±500g dynamic ranges and has a flat bandwidth up to greater than 12kHz. Features an integral molded strain relief and is designed to operating in temperature ranges from -55°C to +100°C.
8042-01 Accelerometer
The Model 8042-01 is a submersible IEPE accelerometer designed for harsh environments. The accelerometer is available in ±10g, ±80g & ±500g dynamic ranges and feature a welded Titanium housing.
8042-ARAP Accelerometer
The Model 8042-AR/AP is a submersible accelerometer designed for harsh environments. The accelerometer is available in ranges from ±5g to ±100g, in either 4-20mA RMS or Peak acceleration output options, and features a welded Titanium housing.
8042-VRVP Velocity Transmitter
The Model 8042-VR/VP is a submersible velocity transmitter designed for harsh environments. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either 4-20mA RMS or Peak velocity output options, and features a welded Titanium housing.
8101 Accelerometer
The Model 8101 is a low cost, plug & play accelerometer designed for general purpose vibration measurements. The accelerometer is available in ±40g or ±160g range and provides a flat frequency response up to >6kHz.
8102 Triaxial Piezoelectric Accelerometer
The Model 8102 is a low cost, plug & play triaxial accelerometer. It incorporates full power and signal conditioning with a maximum current consumption of only 22 micro-amps. Available from ±25g to ±6000g ranges and provides a flat frequency response up to 6kHz.
8711 Accelerometer
The Model 8711-01 are internally shielded rugged IEPE accelerometers designed for industrial condition monitoring. The accelerometers are available in ±5g to ±80g dynamic ranges and have a flat bandwidth up to greater than 10kHz.
8811-01 Accelerometer
The Model 8811-01 are internally shielded rugged IEPE accelerometers with custom lightning protection up to ±2.5kV designed for harsh industrial condition monitoring where accelerometers could be exposed to lightning.
DXA-100 & DXA-200 Series Accelerometer
The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS485 and RS422 outputs.
EGAS3 Triaxial Accelerometer
The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g.
EGCS-D5 Accelerometer
The Model EGCS-D5 accelerometer is critically damped with built-in over-range stops that are set to protect the unit against up to 20,000g shocks.
EGCS3-D Triaxial Accelerometer
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5g through ±5000g. This rugged device is ideal for offshore, downhole and shock testing applications.
FA101 Accelerometer
The FA101 is a general purpose accelerometer which is especially useful for measuring low-level ranges. Packaged in a rugged metal case, the FA101 accelerometers are designed for easy handling to suit a wide range of environmental conditions.
LCF-200 Accelerometer
The Jewell LCF Series Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.
LSB Accelerometer
The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G device designed forindustrial, commercial and aerospace sensing requirements.
LTB Level Transducer
The LTB Level Transducer is a submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in wastewater and liquid level measurements and control.
Model 801X-01
The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
XL403A Accelerometer
Measurement Specialties’ XL403A analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range. Each DC-coupled output is fully scaled, referenced, and temperature compensated. Accuracy is improved by minimizing variations due to temperature and aging effects, and their tough, compact housing holds potted electronics.
XL403D Digital Accelerometer
XL403D accelerometers offer precision measurements while additionally performing basic functions within the sensor. Reduce the need for post-processing time and equipment plus shrink data file sizes; simply request minimum or maximum values, peak-to-peak, magnitude, tilt, or threshold.

Gold Standard™ Load Frames
Available in capacities 3K, 10K, and 55K.
K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy.
TransCal 445 Portable
The Beran 445 Portable TransCal™ provides a simple-to-use, self-contained, battery powered calibrator. It consists of the drive generator, power amplifier, built-in shaker and reference accelerometer, all fitted into a rugged carrying case.
TransCal 455 Integrated Calibration System
The Beran 455 Integrated TransCal™ provides, in one box, all of the measuring devices required to calibrate the majority of vibration transducers. The unit includes a power amplifier to provide drive to the user's shaker and two channels of matched signal conditioning amplifiers, one for the reference transducer and the other for the test transducer.
TransCal 475 Laboratory Calibration System
The Beran 475 Laboratory TransCal™ is a dedicated, high precision instrument for the fully automatic calibration of vibration transducers. The sine correlation measurement technique is used in the Beran 475 to ensure that accurate, repeatable measurements are provided over a wide frequency range and with changing measurement environments.

Accu-Dial Control Potentiometer
The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).
Accu-Tach Control Potentiometer
The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).

10,000 PSI Type HP-10
The Type HP-10 high pressure control valve is available in Globe or Angle configurations. It is well suited for the control of high pressure liquids and gases.
14 in. Extended Bonnet, Type 884
The extended bonnet globe control valve is available in a 14" length for 1/4" through 1" line sizes. It is specifically designed for control of extremely cold or hot fluids and gases. In cryogenic applications, the bonnet length serves to extend the packing area, as well as allow room for insulation around the body and bonnet.
15,000 PSI Type HP-15
The Type HP-15 is a high-pressure control valve using a 17-4ph stainless steel body along with a solid Stellite® innervalve assembly.
3-Way and Diverting, Type 1118
he three-way valve modulates the control of liquids, gases or steam in either mixing or diverting applications. The unit features one common port and two non-common ports. Each innervalve within the unit is connected by a common stem and is stroked simultaneously by the actuator.
3-Way and Diverting, Type 564
The three-way valve is for modulating control of liquids, gases or steam in either mixing or diverting applications. The unit features one common port and two non-common ports. Each innervalve within the unit is connected by a common stem and is stroked simultaneously by the actuator.
40,000 PSI Type HP-40
The HP-40 valve is an ultra high pressure control valve using a tri-axially forged stainless steel body along with a solid Stellite innervalve assembly. The HP-40 valve can be used for both flow control as well as a Class IV shutoff valve. The versatility of the HP-40 valve creates a singular solution for your high pressure applications.
60,000 PSI Type HP-60
An ultra high pressure control valve usinga 17-4 PH body along with a solid Stellite innervalve assembly, the HP-60 can be used for both flow control as well as a Class IV shutoff valve. The versatility of the HP-60 valve creates a singular solution for your high pressure applications.
Bellows Type 808
Bellows sealed globe control valve is especially suited to applications where the possibility of packing leakage cannot be tolerated. The bellows forms a flexible static seal that is virtually leak-free as long as the integrity of the bellows remains intact.
Cold Box Extension Type CBX
The CBX is designed specifically for cryogenic cold box applications. The unique design allows ready access to the seat ring after the body has been sealed in the cold box. A special seat extraction tool simplifies trim changing operations.
Exotic Alloys Type 807 & 752
Manufactured from common products like 316 SS or Monel® to more exotic alloys like tantalum, the RCV Exotic Alloy valves are available in 1/4", 1/2", 3/4" and 1" models, with interchangeable trim sets and threaded bonnet for quick disassembly. The trim characteristics are linear, equal percent, quick open or double taper.
Extended Fin Type 973
The extended fin globe control valve is designed for modulating flow control in industrial or research applications at 1200° F or less and at pressures less than 5000 psi. The added bonnet length and fins serve to reduce the heat at the packing area.
Low Flow Control – Type 807
Our Model 807 control valve has a market leader because of its reliability, flexibility and durability. If your application requires critical control of liquid or gas flow, the RCV 807/752 is a trusted, high performance solution. This model is available in ¼” thru 1” line sizes and a wide range of Cv’s and flow characteristics.
Model 9000
The Model 9000 valve is an ANSI Class 300 globe style valve with bolted bonnet and post guided innervalve. The valve is designed for a variety of industrial applications. The body, bonnet and innervalve are standard in 316SST or optional Alloy C. The standard body, configured in the Flangeless/NPT version, can be installed using NPT fittings or clamped between matching companion flanges.
Model 9000 Flange
The Model 9000 control valve is available with ANSI raised face flanges. The flanges are socket welded to the body and flange. The flange and nipple material is the same material as the body. Flange faces have concentric serrations to provide superior gasket sealing. The unit is rated for either ANSI Class 150 or 300, whichever flange is added.
Model 9100
The Model 9100 process control valve is a 2-way, high capacity globe with a B62 bronze body/bonnet. Comes with a field-reversible actuator and standard live loaded TFE packing.
SCV-85
SCV-85 Research Control Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. Valves of the SCV-85 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes.
SCV-89
SCV-89 Research Control® Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. The standard investment cast body provides a unit that is lightweight and economical. Valves of the SCV-89 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes.
SCV-95
The SCV-95 Sanitary Research Control® Valve is a compact 2 inch control valve. The valve uses Tri-Clover® angle bodies and provides larger line sizes and larger flow coefficients than are available from our other sanitary products. Valves of the SCV-95 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes. This valve is specifically designed to provide precise modulating control when compared to conventional sanitary control valves. The standard characteristic is an extended range linear that is optimized for blending systems.
Series 9000 Extended Bonnet
The Series 9000 control valve is an ANSI Class 300 globe style valve with bolted bonnet and post guided innervalve. The body, bonnet and innervalve are standard in 316SST or optional Alloy C. The standard body, configured in the Flangeless/NPT version, can be installed using NPT fittings or clamped between matching companion flanges. Each size valve is also available with conventional flanges in either the same nominal size as the valve body or oversized flanges that can be adapted to smaller bodies.
Severe Service Type 1711
The Type 1711 Research Control Valve is designed for modulating flow or pressure control in industrial and research applications. The unit features an oversized stem and extra heavy guided innervalve for added strength and longevity.
Severe Service Type 1711HD
The 1711HD features a high pressure bar stock body with a union bonnet, with an oversized stem and extra heavy duty guided innervalve for added strength and longevity. The stem packing is designed for tight sealing, long life and easy maintenance. The union bonnet with a graphite gasket provides excellent sealing without having bonnet threads in contact with the process fluid. The multi-spring, field adjustable 35 square-inch, diaphragm actuator can be either ATO or ATC action. Maximum corrosion protection on all nonstainless actuator components are standard.
SRD960 RCV Universal Positioner
The SRD960 RCV Universal Positioner offers the most advanced technology available on the market today. This includes an infrared interface for wireless operation and configuration, a multi-lingual full-text graphic LCD and an availability with the choice of all in the process automation applied communication protocols. It offers enhanced applications and methods to analyze recorded stroke data.
SRD991 RCV Intelligent Valve Positioner
The SRD991 Intelligent Valve Positioner offers the most advanced technology available on the market today. The technology includes, among others, an infrared interface for wireless operation and configuration, a multi-lingual full-text graphic LCD and an availability with the choice of all in the process automation applied communication protocols. It offers enhanced applications and methods to analyze recorded stroke data.
SRI990 RCV Analog Positioner
The SRI990 RCV Analog Positioner with analog input 4…20 mA is designed to operate pneumatic valve actuators. It offers an easy adjustment by means of switches and potentiometers.
Standard Fin Type 859
The Type 859 globe control valve with cooling fin bonnet is used in extreme temperature applications. The added bonnet length and fins serve to reduce the heat at the packing area. This allows the standard CV ring packing to be used at higher process temperatures than could normally be tolerated with the standard valve.
Standard Flange Type 1499
The Type 1499 globe control valve is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates within the pressure range of the flanges. Its welded construction makes it readily available in a variety of materials and in other types of flanges. Special face-to-face dimensions, as well as mixing of flange size and body size, are also available on request.
Standard Flange Types 860 & 809
This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates in the pressure range of 150 lb flanges.
Type SMV/Manual
The SMV has performed in some of the world’s most demanding applications. If your application requires critical control of liquid, gas or steam, your choice of control valves is one of the most important decisions you will make. The Type SMV/Manual valve is available with interchangeable trim sets and threaded bonnet for quick disassembley. The trim characteristics for this valve are linear, equal percent, quick open or double taper and it has TFE chevron packing and anondized aluminum tee-handle.


480 Bidirectional Weight Indicator
The 480 Bidirectional Weight Indicator has a large 0.8 in LED 6-digit display. It also powers up to 10 load cells.
9330 High Speed Data Logger
The 9330 High Speed Data Logger has a 24 bit resolution along with a 3750 Hz update rate.
9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector.
9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector.
9840 Intelligent Digital Indicator
The 9840 is suitable for use in calibration labs, field service, or anywhere high accuracy is important. Features include a bipolar 6-digit 2-line display, remote sense, low noise, 22-bit resolution, USB port with RS232 communication, mV/V calibration and the ability to store up to 25 different sensors. 6-point linearization, unit conversion, front-panel tare. Self calibration via TEDS Plug & Play ready IEEE1451.4 compliance.
9850 Multi-Channel Digital Indicator
The model 9850's modular design allows the use of 7 different types of channel cards in 2 available channels. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging.
9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality.
ATA-2001 Amplifier
The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility.
CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
CVT Analog Vacuum Controller
CVT Vacuum Controllers are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers operate in the same standard ranges as the VT meters with the addition of single or double user selectable control limits. Includes durable 10A SPDT control points. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes.
DA2510 Digital Indicator for Panel-Frame Mounting
Special Features - 4-character LED display - Format 48 x 96 mm - All functions programmable - Selectable input 0 to 5/10 V, 0/4 to 20 mA - Sensor power supply - Scaling of initial/final value
Digital CVT Vacuum Controller
The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes.
Digital VT Vacuum Indicator
The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes.
DML300 Single Channel LVDT Panel Indicator
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. DML300 series indicators have a five digit display, transducer excitation supply and many software features including max/min memory and math functions. All models are fitted with two analogue outputs - a high speed analogue output for monitoring fast changes of sensor movement, and a separate, electrically isolated, scaleable analogue output.
DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges.
DSI-1000 Digital Slope Indicator
A microprocessor based panel meter designed to take the output from Jewell's gravity referenced inclinometers and display it at an angle. The compact unit provides the ±15VDC sensor excitation with dual channel inputs condition the inclinometer output and displays the angle down to 0.001 degrees.
MVD2510 Panel Meter Amplifier
Control panel measuring amplifier for process control and test bencher.
MVD2555 Panel Meter Amplifier
Carrier frequency amplifier for panel mounting.
THCD-100 Single Channel Power Supply
The THCD-100 is a fully integrated 5-digit display that features many user-convenient features including digital communications, alarm outputs with relays, configurable display units, multiple transducer supplies and more.
THPS-400 Four Channel PowerPod
The THPS-400 is a power supply and indicator capable of displaying four channels simultaneously. It has an integrated totalizer, filter function, and Serial communication. Has the ability to set ratio control for gas blending applications.
THPS-760 Plus Digital Vacuum Controller
The THPS 760 Plus Vacuum Controller is an exceptionally stable, accurate and repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 41/2 digit meter indicates in 0.1 Torr units from 0.1 to 1000.0 Torr. Designed for use with the HPM-760S vacuum sensor.
VT Analog Vacuum Indicator
VT-Series Vacuum Gauges are available in three standard ranges: 0-100 mTorr, 0-1000 mTorr, and 0-20 Torr. A self-contained gauge circuit is attached to the rear of the direct reading meter. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes.
WTS Wireless Telemetry System
The WTS (Wireless Telemetry System) provides easy-to-use wireless data communication between a load sensor and a receiving indicator. The WTS-BS receiver is capable of receiving multiple inputs (selectable) from various load cells or torque transducers.



HazardPRO™ Ambient Temperature Sensor
HazardPRO ambient temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.

VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load.
VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.
VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.

AMF Handle
This style is designed to meet the demands for more complex control systems in off-highway, specialist vehicle applications.
HE Handle
The new HE grip has been ergonomically designed to fit comfortably in either hand – eliminating the need for separate left- and right-hand mouldings – and its main body is molded as a single component to improve rigidity and strength.
JC1200 Hall-Effect Paddle Joystick
The JC1200 is a stylish, non-contacting paddle joystick offering precise fingertip control.
JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options.
JC6000 Rugged Multi-Axis Joystick
The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.
JC8000 Rugged Multi-Axis Joystick Controller
The JC8000 is available with one or two axis configurations and is supplied with a non-contact Hall effect sensing system for maximum operational life. The compact size, high lever strength and superb proportional control are ideal for applications in physically demanding working conditions - such as skid steer loaders controls.
MG Handle
This grip is designed to provide a simple approach to a ‘Person Present’ control.
SWJ Multi-Axis Switched Joystick Controller
The SWJ is a compact low-profile switched joystick controller that provides on/off fingertip control in up to two axes.
SWR Multi-Axis Switched Rocker
The SWR is a compact, switched rocker mechanism offering fingertip/thumb control in up to four half axes.
T-Bar Single Axis Friction Lock Joystick Controller
Developed for use in applications where compact size and simplicty is important, the T-Bar is a single axis, 'put-and-stay' function joystick controller that provides precise fingertip control.

Accuprofile 400 Series Laser Scanners
Low-cost 2D laser scanners with new CMOS camera technology, on-board processor, and memory.
AccuProfile 820 2D Laser Scanner
The AccuProfile 820 2D laser scanners are high-accuracy sensors for industrial surface dimensioning and measurement applications. The scanner quickly and accurately generates low-noise 2D or 3D profile scans of objects, surfaces or scenes. The sensor automatically adjusts laser power and detector exposure to compensate for varying surface conditions.
AR1000 Laser Distance Sensor
The Acuity laser distance sensor model AR1000 can measure 30 meters with an accuracy of 3 mm. Using a reflective target board, the sensor will measure distances up to 150 meter. Ideal for measuring fill levels and material height monitoring, the AR1000 sensor can hold up to very tough environments.
AR200 Laser Measurement Sensor
The AR200 laser measurement sensor is Acuity's most compact product to employ a CMOS detector. Four metric models satisfy precision measuring requirements from 6 mm to 100 mm with up to 12 micron accuracy.
AR2000 Laser Distance Meter
The AccuRange 2000 Laser Distance Meter offers measurement accuracy of 1mm (.04 in) across distances up to 500 meters, and even works on hot surfaces and in bright lights!
AR2500 Laser Sensor
AR2500 laser sensors are Acuity's ultra-compact rangefindermodels. This eye-safe rangefinder can measure to 30 KHz to natural targets 30 meters away or to reflectors 260 meters away. The AR2500 is also available in module format to system integrators and high-volume OEM customers.
AR3000 Laser Distance Sensor
AR3000 distance measurement sensors are Acuity's longest-range models. Ideal for measuring positions of cranes and trolleys, the pulse time-of-lfight sensor can reach 300 meters to normal surfaces and up to 3000 meters when using a reflective target. With sampling speeds to 2 KHz, the AR3000 sensors can monitor the speed of moving targets.
AR500 Laser Position Sensor
The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes.
AR700 Laser Displacement Sensor
The AR700 laser displacement sensor is Acuity's newest, high-resolution sensor. Models vary in measuring range and can achieve resolutions better than 0.2 micron. Increased sampling speeds to 9.4 Khz satisfy the requirements of the road profiling industry.
CCS Initial Confocal Sensor
The CCS Initial confocal sensor is Acuity's value model for ultra-precise displacement and transparent material thickness measurements. This system includes a measurement probe, controller and fiber optic cable, making it user-friendly for benchtop users and system integrators alike.
CCS Prima Confocal Sensor
Acuity's most accurate and most resolute distance sensor employs a unique measuring principle, confocal chromatic sensing. Unlike our time-of-flight and triangulation sensors which use lasers, the CCS Prima Confocal sensors use a white light source to accurately measure the distance to surfaces. Some models are accurate to within 20 nanometers. Additionally, this technology permits measurement and profile of transparent materials like glass, lenses, liquids, etc.

SR1A Industrial • Voltage Divider Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Voltage Divider Output
SR1E Industrial • Incremental Encoder Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Incremental Encoder Output
SR1M Industrial • User Scalable 4–20mA Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable 4–20mA Output
SR1V Industrial • User Scalable VDC Output Signal
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable VDC Output Signal

SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers



11206AC Rate Sensor
The Measurement Specialties’ 11206AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under varied environmental conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
11207AC Rate Sensor
The Measurement Specialties’ 11207AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under harsh conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
31206B Rate Sensor
Measurement Specialties’ 31206B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
31207B Rate Sensor
The Measurement Specialties 31207B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
603 Rate Sensor
The Model 603 is a small, lightweight triaxial rate sensor designed for high impact testing. The sensor utilizes reliable silicon MEMS sensing elements with custom electronics in angular rate ranges of ±500 to ±24,000deg/sec.
620 Rate Sensor
The Model 620 Angular Rate Sensor is a small analog gyroscope designed specifically for automotive safety testing and other system designs requiring accurate measurement of angular velocity.
633 Rate Sensor
The Model 633 6-DOF Sensor is an analog sensor that includes outputs of three gyroscope/rate sensors and three DC accelerometers in one small package. The rate sensors and accelerometers are aligned orthogonally to each other which allow the user to measure motions in all 6 degrees of freedom (6 DOF).
GY407D Rate Sensor
The GY407D is the first rate gyro to support SCPI-like commands, return data in engineering units, and work with an ASCII terminal emulator. It also performs basic functions such as evaluating minimum, maximum, magnitude, and peak-to-peak.


LDM-8000 8 Channel LVDT RVDT Signal Conditioner
The LDM-8000 is a line-powered, 8-channel LVDT/RVDT signal conditioner consisting of eight LDM-1000 signal conditioner modules and a PSD 40-15 power supply, pre-wired and mounted on a DIN rail inside a rugged NEMA 13 enclosure.
140 Inline Amplifier
The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function.
ATA-2001 Amplifier
The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility.
BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output.
BSC8 Multi-Channel Amplifier and PC Interface
The BSC8 has 200K samples/sec as well as a 16-bit resolution. it has 8-channel compatibility.
CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs.
DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth.
DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
DMA2 Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user.
IEM-422 Current Transmitter
The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply.
INF-USB Universal Serial Bus Output Module
The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. Included graphing and logging software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for later research.
ISG Isolated Signal Conditioner
- High Accuracy - Isolated power supply - ±5VDC or±10VDC Analog Output (4-20mA Optional) - 10 to 30 VDC Supply Voltage - Accepts inputs up to 4.5mV/V - 1 Hz to 1 kHz adjustable filter (up to 10kHz optional) - Space saving narrow housing per DIN EN 50022
LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors.
LiM-4-20 Transmitter Module
The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. 4 to 20 mA output may be achieved with LVDT full scale outputs from 100 mV to 5.6 Volts rms.
LVM-110 Voltage Module
The LVM-110 is designed to be a low cost LVDT signal conditioning solution for OEM applications, and is compatible with most standard and special design Measurement Specialties LVDTs. Provides analog voltage output.
MP01 Multi Channel PME Amplifier
Multi-channel amplifier for applications in process supervision and industrial test-rig measurement technology.
MP55 Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers.
MP55DP Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers with DP interface.
MP60 Single Channel PME Amplifier
Single channel module for incremental transducers.
MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface.
PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories.
SCM100 Signal Conditioner
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals.
SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers
SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings.
SI-USB Universal Serial Bus Dual Channel PC Interface Module
The INF-USB2 provides easy USB connection to computer from Load and Torque Transducers. It has 16-bit resolution and up to 5000 Sample/Second.
SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors.
UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation.
UP307B RS232 to RS485 Isolated Serial Converter
The UniPak HD Model UP307B is a configurable, DC powered, DIN rail mount RS232 to RS485 converter with 1500 volt isolation between the serial ports and power. The dip switch selectable communication rates offer flexibility and ease of configuration.
UP328 HD Thermocouple Input Isolating Signal Conditioner
The UniPak HD Model UP328 is a configurable, DC powered, DIN rail mount, thermocouple input signal conditioner with 1500 volt isolation between input, output and power. The dip switch selectable input and output ranges on the UP328 offer flexibility and ease of configuration without calibration equipment. These modules provide accuracies better than 0.1%.
UP409R DC Input, Dual Output Isolating Signal Conditioner
The UniPak™ UP409R is a single channel input, dual channel output configurable isolating signal conditioner. The UP409R provides 1500 V isolation between the input, both output channels and power. The extreme flexibility of the UP409R makes it unique.
UP488 Z109REG2 Universal Input Isolating Signal Conditioner
The UniPak™ model UP488’s universal input configurability accommodates the most popular input types and ranges commonly used: DC current and voltage, RTD (Pt100, Pt500, Pt1000, Ni100), thermocouple (J, K, R, S, T, B, E, N) or a variable resistance input (potentiometer, rheostat, thermoresistance). This flexibility provides the ultimate in inventory and purchase order line item reduction.





HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP
TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle.
TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically.


AccuStar IP-66 Clinometer
The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. Available in various ranges up to ±45°
AMH Series - Analog MEMS Inclinometer M
The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, ±5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.
AML Series - Low Cost Analog MEMS Inclinometer
The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request.
AMS Series - Analog MEMS Inclinometer
The Jewell Instruments model AMSis a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V and 4-20mA output options. All AMS series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request.
AMV Series - Analog MEMS Inclinometer, Temp. Corrected
The model AMV is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with ±5V, or ± 10V output options. All AMV series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request
D-series Dual Axis Inclinometer
The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals.
DMH Series - Digital MEMS Inclinometer
The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.
DMI Series - Digital MEMS Inclinometer, Temperature Corrected
The model DMI is a high precision, digital MEMS inclinometer with built-in thermal compensation. Standard units come with RS232, RS422, RS485 or TTL output options. All DMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.
DML Series - Low Cost Digital MEMS Inclinometer
The Jewell Instruments model DML is a low cost digital MEMS inclinometer for industrial applications. Units are available with RS232 and RS485 output options. All DML series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.
DMS Series - Digital MEMS Inclinometer
The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS232 and RS485 interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.
DOG1 MEMS-Series Inclinometer
The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including temperature compensation.
DOG2 MEMS-Series Dual Axis Inclinometer
A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations).
DPG Dual Axis Inclinometer
The DPG Series dual axis conductive inclinometer in aluminium housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to mount and absolute plug and play compatible. Available ranges from ±5° up to ±30°.
DPL - DPN Dual Axis Inclinometer
The DPL/DPN-Series is modern SMD technology based small board-level dual axis inclinometer applying conductive technology. It is available with both fully compensated digital output TTL/RS232 and/or analogue voltage output 0.3 to 4.7V. Available in ranges from ±2° up to ±30°.
DQG2 Dual Axis Inclinometer
A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°.
DQL Dual Axis Inclinometer
The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25°
DXI-100 & DXI-200 Series Inclinometer
The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485 outputs.
eDXI-100 & eDXI-200 Inclinometer
The eDXI-100/200 inclinometer series is a precision single or dual axis tilt sensor that includes Ethernet capability. With an IP67, RJ45 connector, it is easy to connect to computers and other devices to run automation and networking. This sensor also includes a 0.001° resolution and is fluid-damped for high shock and vibration resistance.
G-Series Inclinometer Switch
This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°.
JMI-D Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. Available in ±14.5°, ±30° and ±90° ranges with a 0.002° resolution. It is also RoHS compliant to suit environmental requirements. With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an IP65 seal, 100 g shock and -40 to +85°C operating range, it will also hold up to many harsh environments. Dual power input version with ±5 VDC output signal.
JMI-S Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. Available in ±14.5°, ±30° and ±90° ranges with a 0.002° resolution. It is also RoHS compliant to suit environmental requirements. With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an IP65 seal, 100 g shock and -40 to +85°C operating range, it will also hold up to many harsh environments. Single power input version with 0-5 VDC output signal.
LCF-196 Inclinometer
The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF-196 is a two-axis unit housed in a 22mm diameter cylindrical package.
LCF-2000 Inclinometer
The JEWELL LCF 2000 Series Inclinometer is a two axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output.
LCF-2330 Inclinometer
The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure suspension, servo technology in a small and convenient package for applications requiring a compact dual axis solution.
LCF-3000 Inclinometer
The JEWELL LCF 3000 Series Inclinometer is a three axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output.
LCI Inclinometer
The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis.
LSOX
The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals or flying leads. Available outputs include +/-5V, 0-5V and 4- 20mA. Custom input ranges, filters and temperature compensation are also available on request.
LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series.
NS-15CAN Dual Axis Inclinometer
The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. Available with digital output signals via CANopen, and a range of ±15°.
P-Series Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°.
RMIW-D Series ±5VDC Output
Input Ranges From ±3° to ±90° Rugged, High Precision, Low Cost, Dual-Ended Power Input Inclinometer
RMIW-L Series 4-20mA Output
Input Ranges From ±3° to ±90° Rugged, High Precision, Low Cost, Dual-Ended Power Input Inclinometer
V-Series Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.

VK20A Junction Box
Junction Box


HBM Digital Load Cells
Digital load cells on the basis of the strain gage technology provide new impetus for the areas of dynamic weighing, sorting, filling, and dosing.
HBM Single Point Load Cells
The term platform scale nowadays covers a wide field of application in the industrial weighing technology. It covers the design and configuration of equipment such as high-precision laboratory balances, shop-counter scales and personal weighing machines right through to post office weighers, medical scales etc. Platform scales are characterised by one or more load cells, usually arranged under a platform (scale pan) on which the goods intended for weighing are placed.

Copyright © Durham Instruments. All Rights Reserved.
1-888-DISENSOR
Website by cpNet