Home Products Industries Manufacturers
 Search Products by Keyword  
Home
About Us
Contact Us
How To Buy
What's New
Service
Resources
Trade Shows
Product Brochure

PDF Download
PDF Download
Visit the OCI Website

View our CGP Certificate

View our ISO Certificate
Mining

Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash. Heavy machinery is a common application for sensor technology.

 
Products
 
13203CC Accelerometer
The Measurement Specialties 13203CC is an interchangeable and rugged uniaxial accelerometer capable of accurately measuring acceleration under demanding environmental conditions. A tough, compact housing holds potted electronics and a shielded heavyweight cable. Its cubical form allows mounting with the sensing axis oriented in any direction.
34201A Triaxial Accelerometer
The Measurement Specialties 34201A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and approximately 100 µg measurement resolution. Each axis is precisely aligned within 0.15 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
7132AHT Accelerometer
The Model 7132AHT is a high temperature miniature triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface.
13200C 23200C Accelerometer
The Measurement-Specialties 13200C (uniaxial) and 23200C (biaxial) analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on one or two axes.
13201A 23201A Accelerometer
The Measurement Specialties 13201A (uniaxial) and 23201A (biaxial) analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range with superior bias stability and approximately 100 µg measurement resolution. Accurately measuring ±1 g, ±1.5 g, or ±2 g accelerations on one or two axes, their tough, compact housing holds potted electronics.
13207A 23207A Accelerometer
The Measurement Specialties 13207A (uniaxial) and 23207A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±10 g, ±20 g, ±30 g, ±40 g, ±50 g, ±60 g or ±70 g accelerations on one or two axes.
13208A 23208A Accelerometer
The Measurement Specialties 13208A (uniaxial) and 33208A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±250 g or ±500 g accelerations on one or two axes. Their tough, compact housing holds potted electronics and their small size and built-in power regulation allow installation where other accelerometers can’t.
15200B 25200B 35200B Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15201A 25201A 35201A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15203B 25203B 35203B Accelerometer
hese Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15207A 25207A 35207A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
15208A 25208A 35208A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
34200B Triaxial Accelerometer
The Measurement Specialties 34200B triaxial analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on three mutually orthogonal axes. Each axis is precisely aligned within 0.5 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34205A Triaxial Accelerometer
The Measurement Specialties 34205A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34205A to fit where other accelerometers can’t.
34206A Triaxial Accelerometer
The Measurement Specialties 34206A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34206A to fit where other accelerometers can’t.
34207A Triaxial Accelerometer
The Measurement Specialties 34207A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34208A Triaxial Accelerometer
The Measurement Specialties 34208A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
3803A Accelerometer
The Model 3803A is a triaxial piezoresistive MEMS accelerometer in a rugged welded hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to greater than 5,000g.
4020 and 4030 Accelerometer
The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth.
4332M3 Accelerometer
The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range.
4610A Accelerometer
The Model 4610A is an ultra low-noise accelerometer designed for both static and dynamic measurements. The accelerometer offers integral temperature compensation with dynamic range from ±2 to ±500g.
4630A Accelerometer
The Model 4630A is an ultra low-noise triaxial accelerometer offering both static and dynamic response. The silicon MEMS accelerometer is gas damped in order to provide a wide stable frequency response.
4835A Accelerometer
he Model 4835A is an ultra-stable MEMS triaxial accelerometer in a rugged, welded Titanium package. The variable capacitance MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide temperature range from -55°C to +125°C.
606M1 Accelerometer
A MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data.
606M2 Accelerometer
The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity.
7531A Accelerometer
The Model 7531A is an adhesively mounted triaxial charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz with a nominal charge output of 1.8pC/g.
7550A Piezoelectric Accelerometer
The Model 7550A is a high temperature piezoelectric charge mode accelerometer designed for long term health usage monitoring on turbine engines. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +300°C with output sensitivity options of 20pC/g & 50pC/g. The model 7550A is hermetically sealed and features the ARINC three hole mounting configuration. Available in ranges: +/- 500g, 1250g
801X-ARAP Accelerometer
The Model 8011 & 8012 are internally shielded rugged 4-20mA accelerometers. The accelerometers are available in ranges from ±5g to ±50g, in either RMS or Peak acceleration output options. The model 8011 features a top exit MIL-C-5015 connector while the model 8012 features an integral cable.
801X-VRVP Velocity Transmitter
The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector and is designed to operating in temperature ranges from -40°C to +85°C. The unit is hermetically sealed and features the popular stud mount installation.
802X-01 Accelerometer
The Model 8021-01 & 8022-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 12kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
8032 IEPE Accelerometer
The Model 8032-01 is an internally shielded rugged IEPE accelerometer designed for harsh environments. It is available in ±50 to ±500g dynamic ranges and has a flat bandwidth up to greater than 12kHz. Features an integral molded strain relief and is designed to operating in temperature ranges from -55°C to +100°C.
8042-01 Accelerometer
The Model 8042-01 is a submersible IEPE accelerometer designed for harsh environments. The accelerometer is available in ±10g, ±80g & ±500g dynamic ranges and feature a welded Titanium housing.
8042-ARAP Accelerometer
The Model 8042-AR/AP is a submersible accelerometer designed for harsh environments. The accelerometer is available in ranges from ±5g to ±100g, in either 4-20mA RMS or Peak acceleration output options, and features a welded Titanium housing.
8042-VRVP Velocity Transmitter
The Model 8042-VR/VP is a submersible velocity transmitter designed for harsh environments. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either 4-20mA RMS or Peak velocity output options, and features a welded Titanium housing.
8101 Accelerometer
The Model 8101 is a low cost, plug & play accelerometer designed for general purpose vibration measurements. The accelerometer is available in ±40g or ±160g range and provides a flat frequency response up to >6kHz.
8711 Accelerometer
The Model 8711-01 are internally shielded rugged IEPE accelerometers designed for industrial condition monitoring. The accelerometers are available in ±5g to ±80g dynamic ranges and have a flat bandwidth up to greater than 10kHz.
8811-01 Accelerometer
The Model 8811-01 are internally shielded rugged IEPE accelerometers with custom lightning protection up to ±2.5kV designed for harsh industrial condition monitoring where accelerometers could be exposed to lightning.
DXA-100 & DXA-200 Series Accelerometer
The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS485 and RS422 outputs.
EGAS3 Triaxial Accelerometer
The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g.
EGCS-D5 Accelerometer
The Model EGCS-D5 accelerometer is critically damped with built-in over-range stops that are set to protect the unit against up to 20,000g shocks.
EGCS3-D Triaxial Accelerometer
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5g through ±5000g. This rugged device is ideal for offshore, downhole and shock testing applications.
FA101 Accelerometer
The FA101 is a general purpose accelerometer which is especially useful for measuring low-level ranges. Packaged in a rugged metal case, the FA101 accelerometers are designed for easy handling to suit a wide range of environmental conditions.
LCF-200 Accelerometer
The Jewell LCF Series Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.
LSM Accelerometer
The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube.
Model 801X-01
The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
XL403A Accelerometer
Measurement Specialties’ XL403A analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range. Each DC-coupled output is fully scaled, referenced, and temperature compensated. Accuracy is improved by minimizing variations due to temperature and aging effects, and their tough, compact housing holds potted electronics.
XL403D Digital Accelerometer
XL403D accelerometers offer precision measurements while additionally performing basic functions within the sensor. Reduce the need for post-processing time and equipment plus shrink data file sizes; simply request minimum or maximum values, peak-to-peak, magnitude, tilt, or threshold.

BA100-1 Conveyor Belt Alignment Switch
Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
BA100-1X Conveyor Belt Alignment Switch
Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure.
BA100-2 Conveyor Belt Alignment Switch
Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
BA100-2X Conveyor Belt Alignment Switch
Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing.

Accu-Dial Control Potentiometer
The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).
Accu-Tach Control Potentiometer
The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).

10,000 PSI Type HP-10
The Type HP-10 high pressure control valve is available in Globe or Angle configurations. It is well suited for the control of high pressure liquids and gases.
14 in. Extended Bonnet, Type 884
The extended bonnet globe control valve is available in a 14" length for 1/4" through 1" line sizes. It is specifically designed for control of extremely cold or hot fluids and gases. In cryogenic applications, the bonnet length serves to extend the packing area, as well as allow room for insulation around the body and bonnet.
15,000 PSI Type HP-15
The Type HP-15 is a high-pressure control valve using a 17-4ph stainless steel body along with a solid Stellite® innervalve assembly.
3-Way and Diverting, Type 1118
he three-way valve modulates the control of liquids, gases or steam in either mixing or diverting applications. The unit features one common port and two non-common ports. Each innervalve within the unit is connected by a common stem and is stroked simultaneously by the actuator.
3-Way and Diverting, Type 564
The three-way valve is for modulating control of liquids, gases or steam in either mixing or diverting applications. The unit features one common port and two non-common ports. Each innervalve within the unit is connected by a common stem and is stroked simultaneously by the actuator.
40,000 PSI Type HP-40
The HP-40 valve is an ultra high pressure control valve using a tri-axially forged stainless steel body along with a solid Stellite innervalve assembly. The HP-40 valve can be used for both flow control as well as a Class IV shutoff valve. The versatility of the HP-40 valve creates a singular solution for your high pressure applications.
60,000 PSI Type HP-60
An ultra high pressure control valve usinga 17-4 PH body along with a solid Stellite innervalve assembly, the HP-60 can be used for both flow control as well as a Class IV shutoff valve. The versatility of the HP-60 valve creates a singular solution for your high pressure applications.
Bellows Type 808
Bellows sealed globe control valve is especially suited to applications where the possibility of packing leakage cannot be tolerated. The bellows forms a flexible static seal that is virtually leak-free as long as the integrity of the bellows remains intact.
Cold Box Extension Type CBX
The CBX is designed specifically for cryogenic cold box applications. The unique design allows ready access to the seat ring after the body has been sealed in the cold box. A special seat extraction tool simplifies trim changing operations.
Exotic Alloys Type 807 & 752
Manufactured from common products like 316 SS or Monel® to more exotic alloys like tantalum, the RCV Exotic Alloy valves are available in 1/4", 1/2", 3/4" and 1" models, with interchangeable trim sets and threaded bonnet for quick disassembly. The trim characteristics are linear, equal percent, quick open or double taper.
Extended Fin Type 973
The extended fin globe control valve is designed for modulating flow control in industrial or research applications at 1200° F or less and at pressures less than 5000 psi. The added bonnet length and fins serve to reduce the heat at the packing area.
Low Flow Control – Type 807
Our Model 807 control valve has a market leader because of its reliability, flexibility and durability. If your application requires critical control of liquid or gas flow, the RCV 807/752 is a trusted, high performance solution. This model is available in ¼” thru 1” line sizes and a wide range of Cv’s and flow characteristics.
Model 9000
The Model 9000 valve is an ANSI Class 300 globe style valve with bolted bonnet and post guided innervalve. The valve is designed for a variety of industrial applications. The body, bonnet and innervalve are standard in 316SST or optional Alloy C. The standard body, configured in the Flangeless/NPT version, can be installed using NPT fittings or clamped between matching companion flanges.
Model 9000 Flange
The Model 9000 control valve is available with ANSI raised face flanges. The flanges are socket welded to the body and flange. The flange and nipple material is the same material as the body. Flange faces have concentric serrations to provide superior gasket sealing. The unit is rated for either ANSI Class 150 or 300, whichever flange is added.
Model 9100
The Model 9100 process control valve is a 2-way, high capacity globe with a B62 bronze body/bonnet. Comes with a field-reversible actuator and standard live loaded TFE packing.
SCV-85
SCV-85 Research Control Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. Valves of the SCV-85 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes.
SCV-89
SCV-89 Research Control® Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. The standard investment cast body provides a unit that is lightweight and economical. Valves of the SCV-89 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes.
SCV-95
The SCV-95 Sanitary Research Control® Valve is a compact 2 inch control valve. The valve uses Tri-Clover® angle bodies and provides larger line sizes and larger flow coefficients than are available from our other sanitary products. Valves of the SCV-95 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes. This valve is specifically designed to provide precise modulating control when compared to conventional sanitary control valves. The standard characteristic is an extended range linear that is optimized for blending systems.
Series 9000 Extended Bonnet
The Series 9000 control valve is an ANSI Class 300 globe style valve with bolted bonnet and post guided innervalve. The body, bonnet and innervalve are standard in 316SST or optional Alloy C. The standard body, configured in the Flangeless/NPT version, can be installed using NPT fittings or clamped between matching companion flanges. Each size valve is also available with conventional flanges in either the same nominal size as the valve body or oversized flanges that can be adapted to smaller bodies.
Severe Service Type 1711
The Type 1711 Research Control Valve is designed for modulating flow or pressure control in industrial and research applications. The unit features an oversized stem and extra heavy guided innervalve for added strength and longevity.
Severe Service Type 1711HD
The 1711HD features a high pressure bar stock body with a union bonnet, with an oversized stem and extra heavy duty guided innervalve for added strength and longevity. The stem packing is designed for tight sealing, long life and easy maintenance. The union bonnet with a graphite gasket provides excellent sealing without having bonnet threads in contact with the process fluid. The multi-spring, field adjustable 35 square-inch, diaphragm actuator can be either ATO or ATC action. Maximum corrosion protection on all nonstainless actuator components are standard.
SRD960 RCV Universal Positioner
The SRD960 RCV Universal Positioner offers the most advanced technology available on the market today. This includes an infrared interface for wireless operation and configuration, a multi-lingual full-text graphic LCD and an availability with the choice of all in the process automation applied communication protocols. It offers enhanced applications and methods to analyze recorded stroke data.
SRD991 RCV Intelligent Valve Positioner
The SRD991 Intelligent Valve Positioner offers the most advanced technology available on the market today. The technology includes, among others, an infrared interface for wireless operation and configuration, a multi-lingual full-text graphic LCD and an availability with the choice of all in the process automation applied communication protocols. It offers enhanced applications and methods to analyze recorded stroke data.
SRI990 RCV Analog Positioner
The SRI990 RCV Analog Positioner with analog input 4…20 mA is designed to operate pneumatic valve actuators. It offers an easy adjustment by means of switches and potentiometers.
Standard Fin Type 859
The Type 859 globe control valve with cooling fin bonnet is used in extreme temperature applications. The added bonnet length and fins serve to reduce the heat at the packing area. This allows the standard CV ring packing to be used at higher process temperatures than could normally be tolerated with the standard valve.
Standard Flange Type 1499
The Type 1499 globe control valve is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates within the pressure range of the flanges. Its welded construction makes it readily available in a variety of materials and in other types of flanges. Special face-to-face dimensions, as well as mixing of flange size and body size, are also available on request.
Standard Flange Types 860 & 809
This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates in the pressure range of 150 lb flanges.
Type SMV/Manual
The SMV has performed in some of the world’s most demanding applications. If your application requires critical control of liquid, gas or steam, your choice of control valves is one of the most important decisions you will make. The Type SMV/Manual valve is available with interchangeable trim sets and threaded bonnet for quick disassembley. The trim characteristics for this valve are linear, equal percent, quick open or double taper and it has TFE chevron packing and anondized aluminum tee-handle.


480 Bidirectional Weight Indicator
The 480 Bidirectional Weight Indicator has a large 0.8 in LED 6-digit display. It also powers up to 10 load cells.
9330 High Speed Data Logger
The 9330 High Speed Data Logger has a 24 bit resolution along with a 3750 Hz update rate.
CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
DA2510 Digital Indicator for Panel-Frame Mounting
Special Features - 4-character LED display - Format 48 x 96 mm - All functions programmable - Selectable input 0 to 5/10 V, 0/4 to 20 mA - Sensor power supply - Scaling of initial/final value
DSI-1000 Digital Slope Indicator
A microprocessor based panel meter designed to take the output from Jewell's gravity referenced inclinometers and display it at an angle. The compact unit provides the ±15VDC sensor excitation with dual channel inputs condition the inclinometer output and displays the angle down to 0.001 degrees.
Micro P Panel Meter
The state of the art in programmable digital panel meters, counters, timers, and serially driven remote displays.
WTS Wireless Telemetry System
The WTS (Wireless Telemetry System) provides easy-to-use wireless data communication between a load sensor and a receiving indicator. The WTS-BS receiver is capable of receiving multiple inputs (selectable) from various load cells or torque transducers.



HazardPRO™ Ambient Temperature Sensor
HazardPRO ambient temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.
HazardPRO™ Shaft RPM Sensor
HazardPRO shaft RPM sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.
HazardPRO™ Stud-Mount Temperature Sensor
HazardPRO stud-mount temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.
HazardPRO™ System
HazardPRO temperature sensors read the temperature of bearings, rub blocks, and equipment surfaces and are 2-wire, loop-powered devices. All models are compatible with HazardPRO nodes, standard I.S. barriers, and PLC analog inputs and are identical with the exception of the measurement probe. HazardPRO temperature sensors are optimized for bearing temperature measurement (probe), belt alignment temperature measurement (brass rubblock), and measuring the ambient surface temperature on a machine.
HazardPRO™ Wireless Node
The HazardPRO Node provides Intrinsically Safe (I.S.) wireless monitoring for up to 10 sensors per node. The Node is integrated into a ireless network that relays information back to a central computer (System Manager). The system is wireless thus allowing reduced costs and faster installations.

VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load.
VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.
VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.

AMF Handle
This style is designed to meet the demands for more complex control systems in off-highway, specialist vehicle applications.
HE Handle
The new HE grip has been ergonomically designed to fit comfortably in either hand – eliminating the need for separate left- and right-hand mouldings – and its main body is molded as a single component to improve rigidity and strength.
JC1200 Hall-Effect Paddle Joystick
The JC1200 is a stylish, non-contacting paddle joystick offering precise fingertip control.
JC150 Rugged Single-Axis Joystick
The JC150 was designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are important.
JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options.
JC6000 Rugged Multi-Axis Joystick
The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.
JC8000 Rugged Multi-Axis Joystick Controller
The JC8000 is available with one or two axis configurations and is supplied with a non-contact Hall effect sensing system for maximum operational life. The compact size, high lever strength and superb proportional control are ideal for applications in physically demanding working conditions - such as skid steer loaders controls.
MG Handle
This grip is designed to provide a simple approach to a ‘Person Present’ control.
SWJ Multi-Axis Switched Joystick Controller
The SWJ is a compact low-profile switched joystick controller that provides on/off fingertip control in up to two axes.
SWR Multi-Axis Switched Rocker
The SWR is a compact, switched rocker mechanism offering fingertip/thumb control in up to four half axes.
T-Bar Single Axis Friction Lock Joystick Controller
Developed for use in applications where compact size and simplicty is important, the T-Bar is a single axis, 'put-and-stay' function joystick controller that provides precise fingertip control.

Accuprofile 400 Series Laser Scanners
Low-cost 2D laser scanners with new CMOS camera technology, on-board processor, and memory.
AR2000 Laser Distance Meter
The AccuRange 2000 Laser Distance Meter offers measurement accuracy of 1mm (.04 in) across distances up to 500 meters, and even works on hot surfaces and in bright lights!
AR3000 Laser Distance Sensor
AR3000 distance measurement sensors are Acuity's longest-range models. Ideal for measuring positions of cranes and trolleys, the pulse time-of-lfight sensor can reach 300 meters to normal surfaces and up to 3000 meters when using a reflective target. With sampling speeds to 2 KHz, the AR3000 sensors can monitor the speed of moving targets.
AR500 Laser Position Sensor
The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes.
AR700 Laser Displacement Sensor
The AR700 laser displacement sensor is Acuity's newest, high-resolution sensor. Models vary in measuring range and can achieve resolutions better than 0.2 micron. Increased sampling speeds to 9.4 Khz satisfy the requirements of the road profiling industry.
CCS Initial Confocal Sensor
The CCS Initial confocal sensor is Acuity's value model for ultra-precise displacement and transparent material thickness measurements. This system includes a measurement probe, controller and fiber optic cable, making it user-friendly for benchtop users and system integrators alike.

SR1A Industrial • Voltage Divider Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Voltage Divider Output
SR1E Industrial • Incremental Encoder Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Incremental Encoder Output
SR1M Industrial • User Scalable 4–20mA Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable 4–20mA Output
SR1V Industrial • User Scalable VDC Output Signal
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable VDC Output Signal

SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers


11206AC Rate Sensor
The Measurement Specialties’ 11206AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under varied environmental conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
11207AC Rate Sensor
The Measurement Specialties’ 11207AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under harsh conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
31206B Rate Sensor
Measurement Specialties’ 31206B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
31207B Rate Sensor
The Measurement Specialties 31207B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
603 Rate Sensor
The Model 603 is a small, lightweight triaxial rate sensor designed for high impact testing. The sensor utilizes reliable silicon MEMS sensing elements with custom electronics in angular rate ranges of ±500 to ±24,000deg/sec.
620 Rate Sensor
The Model 620 Angular Rate Sensor is a small analog gyroscope designed specifically for automotive safety testing and other system designs requiring accurate measurement of angular velocity.
633 Rate Sensor
The Model 633 6-DOF Sensor is an analog sensor that includes outputs of three gyroscope/rate sensors and three DC accelerometers in one small package. The rate sensors and accelerometers are aligned orthogonally to each other which allow the user to measure motions in all 6 degrees of freedom (6 DOF).
GY407D Rate Sensor
The GY407D is the first rate gyro to support SCPI-like commands, return data in engineering units, and work with an ASCII terminal emulator. It also performs basic functions such as evaluating minimum, maximum, magnitude, and peak-to-peak.


LDM-8000 8 Channel LVDT RVDT Signal Conditioner
The LDM-8000 is a line-powered, 8-channel LVDT/RVDT signal conditioner consisting of eight LDM-1000 signal conditioner modules and a PSD 40-15 power supply, pre-wired and mounted on a DIN rail inside a rugged NEMA 13 enclosure.
140 Inline Amplifier
The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function.
BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output.
BSC8 Multi-Channel Amplifier and PC Interface
The BSC8 has 200K samples/sec as well as a 16-bit resolution. it has 8-channel compatibility.
CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs.
DMA2 Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user.
IEM-422 Current Transmitter
The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply.
ISG Isolated Signal Conditioner
- High Accuracy - Isolated power supply - ±5VDC or±10VDC Analog Output (4-20mA Optional) - 10 to 30 VDC Supply Voltage - Accepts inputs up to 4.5mV/V - 1 Hz to 1 kHz adjustable filter (up to 10kHz optional) - Space saving narrow housing per DIN EN 50022
SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers
SI-USB Universal Serial Bus Dual Channel PC Interface Module
The INF-USB2 provides easy USB connection to computer from Load and Torque Transducers. It has 16-bit resolution and up to 5000 Sample/Second.
SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors.
UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation.





HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP
TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle.
TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically.


AccuStar IP-66 Clinometer
The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. Available in various ranges up to ±45°
D-series Dual Axis Inclinometer
The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals.
DOG1 MEMS-Series Inclinometer
The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including temperature compensation.
DOG2 MEMS-Series Dual Axis Inclinometer
A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations).
DPG Dual Axis Inclinometer
The DPG Series dual axis conductive inclinometer in aluminium housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to mount and absolute plug and play compatible. Available ranges from ±5° up to ±30°.
DPL - DPN Dual Axis Inclinometer
The DPL/DPN-Series is modern SMD technology based small board-level dual axis inclinometer applying conductive technology. It is available with both fully compensated digital output TTL/RS232 and/or analogue voltage output 0.3 to 4.7V. Available in ranges from ±2° up to ±30°.
DQG2 Dual Axis Inclinometer
A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°.
DQL Dual Axis Inclinometer
The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25°
DXI-100 & DXI-200 Series Inclinometer
The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485 outputs.
E-Series Inclinometer
The E-Series consists of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Available in ranges ±5° and ±15°.
eDXI-100 & eDXI-200 Inclinometer
The eDXI-100/200 inclinometer series is a precision single or dual axis tilt sensor that includes Ethernet capability. With an IP67, RJ45 connector, it is easy to connect to computers and other devices to run automation and networking. This sensor also includes a 0.001° resolution and is fluid-damped for high shock and vibration resistance.
G-Series Inclinometer Switch
This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°.
JMI-S Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. Available in ±14.5°, ±30° and ±90° ranges with a 0.002° resolution. It is also RoHS compliant to suit environmental requirements. With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an IP65 seal, 100 g shock and -40 to +85°C operating range, it will also hold up to many harsh environments. Single power input version with 0-5 VDC output signal.
LCF-196 Inclinometer
The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF-196 is a two-axis unit housed in a 22mm diameter cylindrical package.
LCF-2330 Inclinometer
The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure suspension, servo technology in a small and convenient package for applications requiring a compact dual axis solution.
LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies.
LSOX
The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals or flying leads. Available outputs include +/-5V, 0-5V and 4- 20mA. Custom input ranges, filters and temperature compensation are also available on request.
LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series.
Model A711-2, A716-2 Floor-mount & Wall-mount Tiltmeter
The model A711-2 (floor-mount), and A716-2 (wallmount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2.
Model A711-2A/B/C(4X) IP65 Weatherproof Floor-mount Tiltmeter
The model A711-2(4X) Weatherproof Floor-mount Tiltmeter offers the same performance as the model A701-2(4X), but in a floor-mount package. Units are rated IP65 waterproof for use in wet, humid, and corrosive environments.
Model C901, C902 Tulip 4-20mA
The model C901 and C902 Tulip Uniaxial Clinometers deliver the same performance as our model A900-series, but with 4-20mA output.
P-Series Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°.
STT500 Sealed Tilt Sensor
The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
V-Series Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.


HBM Digital Load Cells
Digital load cells on the basis of the strain gage technology provide new impetus for the areas of dynamic weighing, sorting, filling, and dosing.
HBM Weighing Load Cells
Industrial production and scales constructions, production of building materials, food and consumer goods industries, pharmacy, and medical engineering... In almost all sectors where goods are produced, processed or controlled, HBM weighing technology components can be found. For the majority of HBM load cells official approval certificates are available. Appropriate certificates are also available for their worldwide use. All our standard load cells are also available for the various zone areas in accordance with the valid ATEX directive.

Copyright © Durham Instruments. All Rights Reserved.
1-888-DISENSOR
Website by cpNet