Home Products Industries Manufacturers
 Search Products by Keyword  
Home
About Us
Contact Us
How To Buy
What's New
Service
Resources
Trade Shows
Product Brochure

PDF Download
PDF Download
Visit the OCI Website

View our CGP Certificate

View our ISO Certificate
Forestry

Forestry is the art and science of managing forests, tree plantations, and related natural resources. Modern forestry generally concerns itself with: assisting forests to provide timber as raw material for wood products.

 
Products
 
13203CC Accelerometer
The Measurement Specialties 13203CC is an interchangeable and rugged uniaxial accelerometer capable of accurately measuring acceleration under demanding environmental conditions. A tough, compact housing holds potted electronics and a shielded heavyweight cable. Its cubical form allows mounting with the sensing axis oriented in any direction.
34201A Triaxial Accelerometer
The Measurement Specialties 34201A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and approximately 100 µg measurement resolution. Each axis is precisely aligned within 0.15 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
7132AHT Accelerometer
The Model 7132AHT is a high temperature miniature triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface.
13207A 23207A Accelerometer
The Measurement Specialties 13207A (uniaxial) and 23207A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±10 g, ±20 g, ±30 g, ±40 g, ±50 g, ±60 g or ±70 g accelerations on one or two axes.
13208A 23208A Accelerometer
The Measurement Specialties 13208A (uniaxial) and 33208A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±250 g or ±500 g accelerations on one or two axes. Their tough, compact housing holds potted electronics and their small size and built-in power regulation allow installation where other accelerometers can’t.
15200B 25200B 35200B Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15201A 25201A 35201A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15203B 25203B 35203B Accelerometer
hese Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package. No data acquisition system is required; data is streamed directly to a PC.
15207A 25207A 35207A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
15208A 25208A 35208A Accelerometer
These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small, easy-to-install package.
34200B Triaxial Accelerometer
The Measurement Specialties 34200B triaxial analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on three mutually orthogonal axes. Each axis is precisely aligned within 0.5 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34205A Triaxial Accelerometer
The Measurement Specialties 34205A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34205A to fit where other accelerometers can’t.
34206A Triaxial Accelerometer
The Measurement Specialties 34206A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range with superior bias stability and measurement resolution. A tough, compact housing holds potted electronics and the small size and built-in power regulation allow the 34206A to fit where other accelerometers can’t.
34207A Triaxial Accelerometer
The Measurement Specialties 34207A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
34208A Triaxial Accelerometer
The Measurement Specialties 34208A triaxial accelerometer offers precision measurements over the entire -40 to +85°C temperature range. Each axis is precisely aligned within 0.75 degree of the theoretical ideal to minimize errors due to misalignment or transverse sensitivity.
3803A Accelerometer
The Model 3803A is a triaxial piezoresistive MEMS accelerometer in a rugged welded hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to greater than 5,000g.
4020 and 4030 Accelerometer
The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth.
4332M3 Accelerometer
The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range.
4610A Accelerometer
The Model 4610A is an ultra low-noise accelerometer designed for both static and dynamic measurements. The accelerometer offers integral temperature compensation with dynamic range from ±2 to ±500g.
4835A Accelerometer
he Model 4835A is an ultra-stable MEMS triaxial accelerometer in a rugged, welded Titanium package. The variable capacitance MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide temperature range from -55°C to +125°C.
7531A Accelerometer
The Model 7531A is an adhesively mounted triaxial charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz with a nominal charge output of 1.8pC/g.
8011-06 Velocity Transducer
The Model 8011-06 is an internally shielded piezo velocity transducer designed for condition monitoring of low frequency rotating machinery. The transducer is available in ranges from 10.0 to 50.0 in/sec and interfaces with the standard IEPE constant current supply.
8042-01 Accelerometer
The Model 8042-01 is a submersible IEPE accelerometer designed for harsh environments. The accelerometer is available in ±10g, ±80g & ±500g dynamic ranges and feature a welded Titanium housing.
8042-ARAP Accelerometer
The Model 8042-AR/AP is a submersible accelerometer designed for harsh environments. The accelerometer is available in ranges from ±5g to ±100g, in either 4-20mA RMS or Peak acceleration output options, and features a welded Titanium housing.
8042-VRVP Velocity Transmitter
The Model 8042-VR/VP is a submersible velocity transmitter designed for harsh environments. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either 4-20mA RMS or Peak velocity output options, and features a welded Titanium housing.
8101 Accelerometer
The Model 8101 is a low cost, plug & play accelerometer designed for general purpose vibration measurements. The accelerometer is available in ±40g or ±160g range and provides a flat frequency response up to >6kHz.
8711 Accelerometer
The Model 8711-01 are internally shielded rugged IEPE accelerometers designed for industrial condition monitoring. The accelerometers are available in ±5g to ±80g dynamic ranges and have a flat bandwidth up to greater than 10kHz.
8811-01 Accelerometer
The Model 8811-01 are internally shielded rugged IEPE accelerometers with custom lightning protection up to ±2.5kV designed for harsh industrial condition monitoring where accelerometers could be exposed to lightning.
EGCS-D5 Accelerometer
The Model EGCS-D5 accelerometer is critically damped with built-in over-range stops that are set to protect the unit against up to 20,000g shocks.
FA101 Accelerometer
The FA101 is a general purpose accelerometer which is especially useful for measuring low-level ranges. Packaged in a rugged metal case, the FA101 accelerometers are designed for easy handling to suit a wide range of environmental conditions.
LTA Level Transducer
The LTA Level Transducer is a submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurements and control.
XL403A Accelerometer
Measurement Specialties’ XL403A analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range. Each DC-coupled output is fully scaled, referenced, and temperature compensated. Accuracy is improved by minimizing variations due to temperature and aging effects, and their tough, compact housing holds potted electronics.
XL403D Digital Accelerometer
XL403D accelerometers offer precision measurements while additionally performing basic functions within the sensor. Reduce the need for post-processing time and equipment plus shrink data file sizes; simply request minimum or maximum values, peak-to-peak, magnitude, tilt, or threshold.

BA100-1 Conveyor Belt Alignment Switch
Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
BA100-1X Conveyor Belt Alignment Switch
Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure.
BA100-2 Conveyor Belt Alignment Switch
Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
BA100-2X Conveyor Belt Alignment Switch
Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing.
Rub Block Door Assemblies
Rub Block Door Assemblies are designed for quick and easy inspection of belts and replacement of worn rub blocks saving time and promoting regular maintenance inspections.

Accu-Dial Control Potentiometer
The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).
Accu-Tach Control Potentiometer
The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).

SCV-85
SCV-85 Research Control Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. Valves of the SCV-85 type are well suited to automated control systems found in biotechnology, pharmaceutical and food processes.


480 Bidirectional Weight Indicator
The 480 Bidirectional Weight Indicator has a large 0.8 in LED 6-digit display. It also powers up to 10 load cells.
9330 High Speed Data Logger
The 9330 High Speed Data Logger has a 24 bit resolution along with a 3750 Hz update rate.
CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
DA2510 Digital Indicator for Panel-Frame Mounting
Special Features - 4-character LED display - Format 48 x 96 mm - All functions programmable - Selectable input 0 to 5/10 V, 0/4 to 20 mA - Sensor power supply - Scaling of initial/final value
DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges.
WTS Wireless Telemetry System
The WTS (Wireless Telemetry System) provides easy-to-use wireless data communication between a load sensor and a receiving indicator. The WTS-BS receiver is capable of receiving multiple inputs (selectable) from various load cells or torque transducers.



Electro-Sentry 1 Single Leg System
The Electro-Sentry 1 is a single leg, stand-alone system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime.
HazardPRO™ Shaft RPM Sensor
HazardPRO shaft RPM sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.
HazardPRO™ Stud-Mount Temperature Sensor
HazardPRO stud-mount temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.
HazardPRO™ System
HazardPRO temperature sensors read the temperature of bearings, rub blocks, and equipment surfaces and are 2-wire, loop-powered devices. All models are compatible with HazardPRO nodes, standard I.S. barriers, and PLC analog inputs and are identical with the exception of the measurement probe. HazardPRO temperature sensors are optimized for bearing temperature measurement (probe), belt alignment temperature measurement (brass rubblock), and measuring the ambient surface temperature on a machine.
HazardPRO™ Wireless Node
The HazardPRO Node provides Intrinsically Safe (I.S.) wireless monitoring for up to 10 sensors per node. The Node is integrated into a ireless network that relays information back to a central computer (System Manager). The system is wireless thus allowing reduced costs and faster installations.

VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load.
VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.
VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.

AMF Handle
This style is designed to meet the demands for more complex control systems in off-highway, specialist vehicle applications.
HE Handle
The new HE grip has been ergonomically designed to fit comfortably in either hand – eliminating the need for separate left- and right-hand mouldings – and its main body is molded as a single component to improve rigidity and strength.
JC1200 Hall-Effect Paddle Joystick
The JC1200 is a stylish, non-contacting paddle joystick offering precise fingertip control.
JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options.
JC6000 Rugged Multi-Axis Joystick
The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.
JC8000 Rugged Multi-Axis Joystick Controller
The JC8000 is available with one or two axis configurations and is supplied with a non-contact Hall effect sensing system for maximum operational life. The compact size, high lever strength and superb proportional control are ideal for applications in physically demanding working conditions - such as skid steer loaders controls.
MG Handle
This grip is designed to provide a simple approach to a ‘Person Present’ control.
SWJ Multi-Axis Switched Joystick Controller
The SWJ is a compact low-profile switched joystick controller that provides on/off fingertip control in up to two axes.
SWR Multi-Axis Switched Rocker
The SWR is a compact, switched rocker mechanism offering fingertip/thumb control in up to four half axes.
T-Bar Single Axis Friction Lock Joystick Controller
Developed for use in applications where compact size and simplicty is important, the T-Bar is a single axis, 'put-and-stay' function joystick controller that provides precise fingertip control.

Accuprofile 400 Series Laser Scanners
Low-cost 2D laser scanners with new CMOS camera technology, on-board processor, and memory.
AR2000 Laser Distance Meter
The AccuRange 2000 Laser Distance Meter offers measurement accuracy of 1mm (.04 in) across distances up to 500 meters, and even works on hot surfaces and in bright lights!
AR3000 Laser Distance Sensor
AR3000 distance measurement sensors are Acuity's longest-range models. Ideal for measuring positions of cranes and trolleys, the pulse time-of-lfight sensor can reach 300 meters to normal surfaces and up to 3000 meters when using a reflective target. With sampling speeds to 2 KHz, the AR3000 sensors can monitor the speed of moving targets.
AR500 Laser Position Sensor
The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes.
AR700 Laser Displacement Sensor
The AR700 laser displacement sensor is Acuity's newest, high-resolution sensor. Models vary in measuring range and can achieve resolutions better than 0.2 micron. Increased sampling speeds to 9.4 Khz satisfy the requirements of the road profiling industry.
CCS Initial Confocal Sensor
The CCS Initial confocal sensor is Acuity's value model for ultra-precise displacement and transparent material thickness measurements. This system includes a measurement probe, controller and fiber optic cable, making it user-friendly for benchtop users and system integrators alike.

SR1A Industrial • Voltage Divider Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Voltage Divider Output
SR1E Industrial • Incremental Encoder Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. Incremental Encoder Output
SR1M Industrial • User Scalable 4–20mA Output
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable 4–20mA Output
SR1V Industrial • User Scalable VDC Output Signal
The SR1 Series String Pots are rugged, low-cost, high performance cable-extension transducers designed for position feedback in wet environments and outdoor applications. User Scalable VDC Output Signal

SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers


11206AC Rate Sensor
The Measurement Specialties’ 11206AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under varied environmental conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
11207AC Rate Sensor
The Measurement Specialties’ 11207AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under harsh conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable.
31206B Rate Sensor
Measurement Specialties’ 31206B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
31207B Rate Sensor
The Measurement Specialties 31207B Triaxial Rate Gyro is capable of sensing angular rate around three orthogonal axes. Fully temperature compensated analog outputs are available for the X, Y and Z axes.
GY407D Rate Sensor
The GY407D is the first rate gyro to support SCPI-like commands, return data in engineering units, and work with an ASCII terminal emulator. It also performs basic functions such as evaluating minimum, maximum, magnitude, and peak-to-peak.


LDM-8000 8 Channel LVDT RVDT Signal Conditioner
The LDM-8000 is a line-powered, 8-channel LVDT/RVDT signal conditioner consisting of eight LDM-1000 signal conditioner modules and a PSD 40-15 power supply, pre-wired and mounted on a DIN rail inside a rugged NEMA 13 enclosure.
BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output.
BSC8 Multi-Channel Amplifier and PC Interface
The BSC8 has 200K samples/sec as well as a 16-bit resolution. it has 8-channel compatibility.
CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs.
DMA2 Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user.
IEM-422 Current Transmitter
The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply.
ISG Isolated Signal Conditioner
- High Accuracy - Isolated power supply - ±5VDC or±10VDC Analog Output (4-20mA Optional) - 10 to 30 VDC Supply Voltage - Accepts inputs up to 4.5mV/V - 1 Hz to 1 kHz adjustable filter (up to 10kHz optional) - Space saving narrow housing per DIN EN 50022
LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors.
LiM-4-20 Transmitter Module
The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. 4 to 20 mA output may be achieved with LVDT full scale outputs from 100 mV to 5.6 Volts rms.
LVM-110 Voltage Module
The LVM-110 is designed to be a low cost LVDT signal conditioning solution for OEM applications, and is compatible with most standard and special design Measurement Specialties LVDTs. Provides analog voltage output.
MP60 Single Channel PME Amplifier
Single channel module for incremental transducers.
MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface.
SCM100 Signal Conditioner
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals.
SD01A Safety Barrier
Special features - Three optimized safety barriers for intrinsically safe installation according to ATEX for HBM transducers in potentially explosive atmospheres - EC type examination certificate BAS01ATEX7005 (Ex II (1) GD, [EEx ia] IIC) - For use in HBM electronics with balanced earth in carrier frequency and DC-voltage amplifiers
SI-USB Universal Serial Bus Dual Channel PC Interface Module
The INF-USB2 provides easy USB connection to computer from Load and Torque Transducers. It has 16-bit resolution and up to 5000 Sample/Second.
SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors.
UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation.






DOG1 MEMS-Series Inclinometer
The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including temperature compensation.
DOG2 MEMS-Series Dual Axis Inclinometer
A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations).
DQG2 Dual Axis Inclinometer
A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°.
DQL Dual Axis Inclinometer
The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25°
G-Series Inclinometer Switch
This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°.
JMI-S Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. Available in ±14.5°, ±30° and ±90° ranges with a 0.002° resolution. It is also RoHS compliant to suit environmental requirements. With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an IP65 seal, 100 g shock and -40 to +85°C operating range, it will also hold up to many harsh environments. Single power input version with 0-5 VDC output signal.
LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies.
LSOX
The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals or flying leads. Available outputs include +/-5V, 0-5V and 4- 20mA. Custom input ranges, filters and temperature compensation are also available on request.
LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series.
Model A711-2A/B/C(4X) IP65 Weatherproof Floor-mount Tiltmeter
The model A711-2(4X) Weatherproof Floor-mount Tiltmeter offers the same performance as the model A701-2(4X), but in a floor-mount package. Units are rated IP65 waterproof for use in wet, humid, and corrosive environments.
Model C901, C902 Tulip 4-20mA
The model C901 and C902 Tulip Uniaxial Clinometers deliver the same performance as our model A900-series, but with 4-20mA output.
V-Series Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.



Copyright © Durham Instruments. All Rights Reserved.
1-888-DISENSOR
Website by cpNet